Deni 5300 Specifications download pdf (Page 10)

Magtrol Model 5300 Three Phase Power Analyzer

Chapter 2 - Specifications

DIGITAL

• Processing:

Integration period = 0.10 second.

Display update time = 2 readings per second.

• IEEE-488 (GPIB):

Synchronized = 0.1 sec. per reading

Non-synchronized is 0.04 to 0.07 sec per

reading.

MEASUREMENT ACCURACY

Specified test conditions: Ambient temperature of 72°

± 10°F and power factor of 0.1 to 1.0, lead or lag.

VOLTAGE - DC

(0.1% of reading + 0.2% of range)

VOLTAGE - AC:

10 Hz to < 20 Hz

1.0% of range

20 Hz to < 45 Hz

(0.2% of reading + 0.3% of range)

45 Hz to < 10 kHz

(0.1% of reading + 0.2% of range)

10 kHz to 20 kHz

(0.2% of reading + 0.5% of range)

CURRENT - DC 25 and 100 Amp Ranges

(0.1% of reading + 0.2% of range)

CURRENT - AC:

5 Amp Range

10 Hz to < 20 Hz

1.0% of range

20 Hz to < 45 Hz

(0.2% of reading + 0.3% of range)

45 Hz to < 1 kHz

(0.1% of reading + 0.2% of range)

1 kHz to < 5 kHz

(0.2% of reading + 0.3% of range)

5 kHz to < 10 kHz

(1.0% of reading + 1.0% of range)

10 kHz to 20 kHz

(2.0% of reading + 2.0% of range)

25 Amp Range

10 Hz to < 5 kHz

same as 5 Amp range

5 kHz to 10 kHz

(2.0% of reading + 2.0% of range)

100 Amp Range

10 Hz to < 1 kHz

0.5% of rng

1 kHz to 2 kHz

(2.0% of reading + 2.0% of range)

POWER - DC

(0.1% of reading + 0.2% of VA range)

POWER - AC

± [(0.1% of reading + 0.2% of (Amps

range × Volts range)]

POWER FACTOR

(VA error ± W error)

CREST FACTOR

Exceeds 3:1 (at 50% of range full scale)

TEMPERATURE

COEFFICIENT

0.01% of range per deg. C maximum

DISPLAY

Digital display error ± 1 LSB.

ACCURACY CERTIFICATION

All instruments are shipped with a Certificate of

Calibration from Magtrol Inc. Magtrol policies and

procedures comply with MIL-STD-45662A.

Measurement standards are traceable to the National

Institute of Standards and Technology (NIST).

Instrument calibration every six calendar months is

necessary to maintain full compliance with all

specifications. If a one year calibration cycle is used,

all accuracy specifications are reduced by 0.1%. After

one calendar year, the instrument is considered to be

out of calibration.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Comments to this Manuals

No comments

Deni 5300 Specifications Page 10

Comments to this Manuals